ECO SAFETY LIGHT ZLD-28/34/44/EM/MAR
Self testing, maintained LED EXIT sign/luminary that is used in ships. These LED exit luminaries have elegant and modern design and are usually installed at internal spaces. The LED technology is environmentally friendly and has low energy consumption. These luminaries can be used as 1 or 2 sided in surface mounting. The PVC surface of the luminary hosts a pictogram that is illuminated from a led strip on the top of the luminary. The pictogram is easily replaceable as easily replaceable is the battery which is placed on the top of the luminary. These advantages concur to a low maintenance cost.
The housing of these luminaries is from aluminum and PVC. An easy installation at walls and ceilings is accomplished with a range of different bases.
Exit luminaries are permanently connected to the mains power supply and while the power is on the battery is charging and the led strip lights continuously. In case of a mains power supply failure the led strip will be supplied by battery and will light continuously. The advantage of these emergency luminaries is the self-testing function that measures battery's back up power and checks the functionality of Led strip and the supplying circuit. This check can be held manually too. During manual test all indication LEDs are off. The RESET button erases all the indicated LED errors with a 5 seconds pressing on the button.
These luminaries, according to Lloyd's Register Type Approval System, are suitable for marine and offshore applications for use in environmental categories ENV1 & ENV2, where ENV1 are controlled environments and ENV2 are enclosed spaces subject to temperature, humidity and vibration.
The housing of these luminaries is from aluminum and PVC. An easy installation at walls and ceilings is accomplished with a range of different bases.
Exit luminaries are permanently connected to the mains power supply and while the power is on the battery is charging and the led strip lights continuously. In case of a mains power supply failure the led strip will be supplied by battery and will light continuously. The advantage of these emergency luminaries is the self-testing function that measures battery's back up power and checks the functionality of Led strip and the supplying circuit. This check can be held manually too. During manual test all indication LEDs are off. The RESET button erases all the indicated LED errors with a 5 seconds pressing on the button.
These luminaries, according to Lloyd's Register Type Approval System, are suitable for marine and offshore applications for use in environmental categories ENV1 & ENV2, where ENV1 are controlled environments and ENV2 are enclosed spaces subject to temperature, humidity and vibration.
.
| Type | ZLD-28/EM/MAR | ZLD-34/EM/MAR | ZLD-44/EM/MAR |
| Operation Voltage | 220-240V AC/50-60Hz | ||
| Maximum Power consumption | 3,8W/6,5VA | 4W/6,7VA | 4,3W/6,9VA |
| Battery (Ni-Cd) | 3,6V/1,5Ah | ||
| Battery protection | From overcharge and full discharge | ||
| Indications - Controls | Charge, Lamp Fault, Indication Led, TEST button | ||
| Charging Time | 24h | ||
| Minimum autonomous duration | 180min | ||
| Illumination(230V/Emergency) | 125/125lm | 145/125lm | 170/125lm |
| Degrees of cover protection | IP40 | ||
| Produced in accordance with | EN 60598-1, EN 60598-2-22, EN 550 15, EN61547, EN 61000-3-2, EN 61000-3-3, IEC 60092-306, IEC 60533 | ||
| Suitable for enviromental categories | ENV1, ENV2 | ||
| Operation temperature range | 5°C to 40°C | ||
| Relative humidity | Up to 95% | ||
| External dimensions | 290 x 172 x 38 mm | 350 x 242 x 38 mm | 450 x 275 x 38 mm |
| Typical weight | 760gr. | 1125gr. | 1565gr. |
| Guarantee | 3 years (1 year for the battery) | ||
